3.6V ER-2/3A size 2/3A lithium battery supply by UNICELL in Singapore
UNICELL a Leading Supplier for 3.6V lithium battery In Singapore Malaysia and Indonesia since 1986
Order code : ER2/3A
Categories: 3.6V Primary Lithium Thionyl Chloride (Li-SOCI 2) battery
Description: 3.6V Lithium battery
Size in mm: Diameter 17 x Height 33.5 mm max.
Weight: 12 g (apx.)
Terminal: Flat ( Can custom weld the solder tab or solder pin )
Application: back-up system . timer power supply
Nominal Weight: 12 g (Apx.)
Nominal Voltage 3.6 Volts DC
Nominal Capacity: 1600 mAh ( 0.2mA to 2.0V)
Cutoff Voltage: 2.0 Volts
Max. Continuous current: 75mA
Max. Pulse current: 150mA
Operating Temperature: -55 °C to +85 °C
Storage Temperature: -30 °C to +60 °C
Shelf life: 10 yrs. Under controlled storage (20°C, 50%RH)
Substitute or corss refer to the battery part no.
ER17335 battery
Eternacell T04 battery
Eternacell T32/41 battery with button terminal
Eternacell T32/42 battery with solder tab terminal
Eternacell T32/43 battery with radial PC
Eternacell T32/46 battery with axial terminal
Honeywell 629-3004 battery
Maxell ER17/33 battery
Saft LST17330 battery
Saft LS17330 battery
Toshiba ER17/33 battery
Unicell ER2/3A battery
Caution:
- Don’t make the battery short-circuit,
- do not try to charge it, don’t over discharge it ,
- do not disassemble it Press or burn the battery over 100°C.
- Do not put the inside of the battery into the water
- on fire it will explode
Disclaimer: The products supplied by our Company are [replacement for] sold for use with certain products manufacturers, and any reference to products or trademarks of such companies is purely for the purpose of identifying the computers with which our products [are replacement for] may be used. Our Company and this Web site are neither affiliated with, authorized by, licensed by, distributors for, nor related in any way to these computer manufacturers, nor are the products offered for sale through our web site manufactured by or sold with the authorization of the manufacturers of the computers with which our products [are replacement for] may be used. |
