The network cable tester supply by UNICELL in Singapore
UNICELL a Leading IT product supplier in Singapore Malaysia Indonesia Philippines Brunei and Thailand since 1986 , we carry more the 66,000 model
Order code : TL-NF-468B (network cable tester )
network cable tester BNC multifunctional line telephone monitoring line
for testing the :
test RJ45 to RJ45 connection
test RJ11 to RJ11 connection
test BNC to BNC connection
test RJ45 to BNC connection
test BNC to RJ45 connection
automatic scanning method, a quick test, streamlined shape, accord with human body engineering design.
Smooth lines concise, drop, prevent light design, more in line with the site construction.
Product features:
Function:
1. The twisted-pair 1,2,3,4,5,6,7,8, G the line to by root (for) test, which can distinguish and determine the root (on) the wrong line, short circuit and open circuit.
2. Switch ON for normal testing speed, "S" for the slow speed of test, M for manual.
Twisted-pair cable test: open the power supply, cable plug into the tester and remote tester respectively,
Host order bright light is from 1 to G one by one, the legend:
The main tester: 1-2-3-1-2-3-7-8 - G
Remote tester: 1-2-3-1-2-3-7-8 - G (RJ45)
The 1-2-3-1-2-3 -- -- -- -- -- - (RJ12)
The 1-2-3-4 -- -- -- -- -- -- -- -- -- - (RJ11)
If the connection is not normal, according to the following situation shows that:
1. When there is a cable as the cut-off line 3, the main tester and remote test end 3 lights are not bright.
2. When there is a few lines, the lines are not bright, when less than two wires connected cables, lights are not bright.
3. When two cables out-of-order, case 2, 4 line out-of-order, are shown as follows:
Lord tester unchanged: 1-2-3-1-2-3-7-8 - G
Remote testing end is: 1-4-3-1-4-3-7-8 - G
4. When the cable has two short circuit, the main tester display is not bright, and the remote testing end according to short-circuit the two wires of lights are dim, if more than three (3) the short circuit is all short circuit lines, the lights are not bright.
Three, if the distribution frame and the wall base module, you have two matching jumper (such as 110 p4 - RJ45) led to the tester.
Four, coaxial cable test: if the cable is good, the second end BNC lamp flashing green light at the same time.
Five, BNC line test specification
1, dial position switches, choose fast or slow, the power indicator.
2, to end the BNC test line into the tester BNC head and turn the other end connected to the RJ45 BNC wiring BNC head, and will be wiring the RJ45 interface RJ45 access remote test end, is the main tester indicator and the remote testing end light is 1 to 2 cut a shiny and circulation.
3, if the disconnection, out-of-order short circuit are displayed as described in test method.
4, test finished, shut off the power, the power indicator light.
Fit or replace product model: (Cross refer or compatible chart )
Unicell International is not affiliated in any way with any of the manufacturers listed in this catalogue and the batteries sold in this catalogue have not been sponsored or approved by any of such manufacturers. Any trademarks or model numbers listed in this catalogue are identified for compatibility or cross-reference purposes only |
